This heating cutter is a kind of convenient and practical cutting tool specially for cutting polyester fabrics, such as fiber banner.
The fabric hot cutteris a wonderful tool with good cutting effect.
There is no rough burr after cutting.
The heat cutter tool is power saving and easy to operate.
The temperature cutting blade can go up to 500°C for which rising to 500°C it takes within 6-8 seconds.
Also, the structure is reasonable and comfortable for using. Most customers use this heating banner cutting tool to cut fiber banner or other advertising fabric graphics well.
Temp.of blade:6-8 seconds heating up 500°C
Length of the Wire: 3M
Dimension: 24 x 4.5 x 3.5cm
Packing Size: 28 x 23 x 8.5cm
Gross Weight: 0.7kg
hot knife cutter, used together with different type blades,
can be used for cutting different materials.
1, Use the Allen Key loosen the screw in the copper clamp.
2.Insert two pins of the blade in to the copper clamp, and then
tighten the screw, make sure that the clamp is touch enough
with the blade, if not the blade will not work well.
1.Turn the temperature adjustment to the middle place, put the blade
in the goods for cutting, and then press the switch. Only seconds,
the blade will heat up, before real cutting, suggest do the trial cutting
in the waste materials
2.The temperature adjustment have 16 steps, you can check that the
line in the knob, when the line is longer, that the output power larger.
3.Make sure the harmony of temperature and speed when cutting. If
there is too much smoke, reason may be slow cutting or the overheated.
It will lead to irregular and uneven cutting for the materials.In this case,
need to adjust the work temperature of the blade or loosen the switch
intermittent when cuttin
4.Loosen the switch, when there is only 3-5cm before finishing the cutting.
5.Please clear the residuum in the blade by copper brush after cutting.
1.Please make sure the tool is used under condition of ventilation.
2.Don’t burn the residuum in the blade, the blade will be crooked.
3.Don’t burn the blade without touching the cutting materials.
4.Don’t touch the blade by hand when heating, and don’t put the
blade near to the inflammable after heating.
5.Handle the blade after cooling to avoid scalding.
6.Make sure the suitable output power and cutting speed,
overheating will burn out the blade.
7.Intermittent operating for the tool, suggest that loosen the switch
for a second after 30 seconds’ working
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|